DESCRIPTION
AQUACLEAR 100 is a water based penetrating natural stone impregnator designed to work as water, stain repellent and easy maintenance. AQUACLEAR 100 does not change or yellow the stone’s surface or outlook. It’s natural look and unique properties allow true vapour transmission after curing. AQUACLEAR 100 is also unaffected by ultra violet and therefor suitable for internal or external application. AQUACLEAR 100 can be applied as a sacrificial coat, this is especially good for porous material like hand made terra cotta tiles, prior to installation work.
APPLICATION SURFACES
Sandstone, limestone, slates, textured granites, sand blasted marbles, bricks, terra-cotta tiles, clay pavers, and most of other porous surfaces.
DESCRIPTION
AQUAMATTE 200 is a uniquely formulated acrysilicone based sealer developed for deep penetration of porous and semi porous natural stones. AQUAMATTE 200 water based penetrating natural stone sealer is unlike polyurethane based sealer, which changes the stone colour drastically. AQUAMATTE 200 provides good stain resistant and leaves the treated surface a satin matte original look. AQUAMATE 200 has excellent weathering properties and is unaffected by ultra violet rays and therefor suitable for both internal and external application.
APPLICATION SURFACES
Sandstone, limestone, Solnhofener stone, slates, textured granites, sand blasted marbles, bricks. Terra Cotta Tiles, clay pavers and most of other porous surfaces.
DESCRIPTION
AQUASHINE 300 is a specially formulated high quality micro acrylic emulsion, which cures to form clear tough gloss surface. AQUASHINE 300 has been perfected in our laboratory and has superior performances compared to other acrylic or polyurethane sealer, which peels easily and has poor ultra violet properties. AQUASHINE 300 topical coating has been stabilised to withstand wear and tear. AQUASHINE 300 is suitable for both internal and external application.
APPLICATION SURFACES
Sandstone limestone, Solnhofener stone, slates, textured granites, sand blasted marbles, bricks, Terra Cotta tiles, clay pavers and most of other porous surfaces.
DESCRIPTION
STONEPOXY 500 is an ultra violet stabilised clear solvent based specially formulated hydro – acrylic solution. STONEPOXY 500 cures to an extremely hard tough coating that has high chemical resistant and increases the hardness level of the applied surfaces. STONEPOXY 500 surpasses most demanding wear and tear factors. STONEPOXY 500 cures to an epoxy like characteristic therefore permitting vehicular traffic. Pebbles, natural stones and concrete treated and protected with STONEPOXY 500 inhibits an anti graffiti properties and anti fungal resistant. Stone of calcium carbonate base like limestone when treated with STONEPOXY 500 is totally acid proof.
APPLICATION SURFACES
Pebbles, rocks, cobbles tones, textured granites, slates, tumbled marble, limestone, concrete clay pavers & roofing tiles.
DESCRIPTION
PROSEAL 1000 is a special silicone based impregnator blended with special resins, of highest stability against alkali, water, oil and grease for internal and external application. PROSEAL 1000 is suitable for most polished / honed granite or marble, homogenous tiles and surface treated with PROSEAL 2000 is 98% permeable. PROSEAL 1000 if applied before installation of the tile helps prevent water marks caused by dampness within, alternatively prior to the fixing of the tiles, application of AQUADAMP 400 anti dampness back treatment would be ideal and cost effective. PROSEAL 1000 produce a totally natural appearance once cured.
APPLICATION SURFACES
Polished / honed granite or marble and homogenous tiles.
DESCRIPTION
MOIST PROOF 1050 is a long lasting penetrating moisture blocker for both surface and underside treatment for Marble / Granite/ Natural Stones & Terra Cotta Tiles. MOIST PROOF 1050 is highly permeable and exhibits excellent resistance to alkali, dirt, water and efflorescence. MOIST PROOF 1050 is highly recommended to be applied on the underside of the stone prior to the installation preventing future dampness problems. MOIST PROOF 1050 penetrates into the stone and has a total natural appearance once cured.
APPLICATION SURFACES
Polished/ honed granite or marble and homogenous tiles.
DESCRIPTION
AQUAPRO 1010 is a special water based silicone impregnator blended with special resins, of highest stability against alkali, water, oil and grease for internal and external application. AQUAPRO 101o deep penetrating sealer is suitable for most porous and semi porous meterials like, Solnhofener stones, Jura Marble, Sandstone and certain Granite or Marble. AQUAPRO 1010 can be used on slightly humid surface and does not change the colour of the surface. AQUAPRO 1010 does not create any film barrier and allows vapor transmission. AQUAPRO 1010 is designed to block moisture when sed on the underside of the stone prior to the installation.
APPLICATION SURFACES
Solnhofener stones, limestone, Jura Marble, Terrazzo, slates, sandstone, Terra Cotta, polished / honed granite or marble, quarry tiles and Agglomerate.
DESCRIPTION
CRYSTALSHINE 1800 – NON SLIP SOLUTION is a unique specially formulated two in one stone enhancer and non slip solution, designed to be used on POLISHED AND HONED material like marble, granite, limestone and ceramic tiles. CRYSTALSHINE 1800 – NON SLIP SOLUTION is designed with very fine micro synthetic resins that bind onto virtually any low water absorption material with a dense surface. After a proper application of CRYSTALSHINE 1800 – NON SLIP SOLUTION the stone or tile’s surface will produce crystal clear shine. However CRYSTALSHINE 1800 – NON SLIP SOLUTION is not meant to be used as a substitute for conventional diamond polishing, but as a genuine enhancer for a natural long lasting shine.
NON SLIP characteristic is also one of the special formulations of CRYSTALSHINE 1800 as it creates a co-efficient of friction on the smooth surface of the floor and this is especially so on polished marble or Terrazzo floor of calcium carbonate based materials. The micro resins are designed to bind onto the polished texture, when cured it adheres to surface without any wax liked film, and the texture remains natural.
APPLICATION SURFACES
Ceramic tiles, homogenous tiles, terrazzo, polished marble and granite.
DESCRIPTION
EUROWAX 1900 GLOSS is specially formulated water based liquid wax with high ultra violet resistant and superior hardness. EUROWAX 1900 GLOSS when used in conjunction with MOISTPROOF 1050, PROSEAL 1000 OR AQUAPRO 1010 protects the treated surface against marking stains and reduces maintenance cost. EUROWAX 1900 GLOSS reduces etching from acidic compounds and prolongs the stone’s gloss. Unlike most waxes EUROWAX 1900 GLOSS does not yellow the surface and creates a high build-up and gloss naturally.
APPLICATION SURFACES
Polished / honed marble, polished limestone, granite, terrazzo, homogenous & porcelain tiles and vinyl tiles, requiring a reflective natural appearance.
DESCRIPTION
COTTO SEALER 2000 has been formulated after years of research for a simpler and lasting treatment for Cotto-tiles and Terra Cotta material. COTTO SEALER 2000 when used after the application of MOIST PROOF 1050 provides an excellent stain, grease, water and oil protection. COTTO SEALER 2000 can be used for both internal and external application and it does not create a thick yellowish film. COTTO SEALER 2000 has been designed to provide a tough protection for heavy pedestrian and light vehicular traffic area and the finished product provides a beautiful matte finish depending on the type of material used.
APPLICATION SURFACES
Terra cotta tiles (handmade & semi-handmade) slates, pebbles, flamed granite or textured marble (Rough).